News

  1. REINTRODUCING RCV FORD RAPTOR AXLE SET for 1st & 2nd Gen Raptors!

    RCV Performance has taken special care to redesign a new IFS axle set for Ford Raptor Gen 1 & Gen 2!  We have carefully engineered this axle to be the ultimate solution for the Raptor in any environment.  The axles feature a double-offset inboard CV joint that is comprised of 1-inch diameter ball bearings 300M Dana 60 sized internal components.  The outboard CVs utilize our Dana 60 architecture with 300M components optimized for maximum strength.  The stub spindle nut size has been increased for added strength.  The center bar is 35 spline, 1.625” diameter 300M, the strongest in the industry.  The RCV high-temp “Spec Grease” is used in the CVs to control heat build-up in even the most extreme use environments.

    We have been testing these axles in a variety of applications and different environments.  This axle set is designed to be a direct factory replacement.

    Axles as tested designed to fit the following models but not limited to: 2010-2017 Ford F-150 Raptor. (CJVIFS-FORD1)

     

    Additional kits available for the +3 Raptor Performance Group long travel kit (CVJIFS-FORD1+3)

     

    RCV CV Axles are low maintenance and operate with a smoothness you can feel – whether off road or on the street.  As always, our new Ford Raptor axles are backed with a “No Questions Asked” limited lifetime warranty.

    For information on this product, please call us at 815-877-7473, email us at sales@rcvperformance.com, or visit us online at www.rcvperformance.com.

    Read more »
  2. INTRODUCING RCV CARBON FIBER CV PROP SHAFT FOR POLARIS RZR 2-SEAT & 4-SEAT MODELS

    RCV Performance Products is introducing the all-new CARBON FIBER prop shaft to our UTV line featuring specially designed CVs. The carbon fiber design with hard-coated 7075 aluminum end yokes is HALF the weight of OEM, reducing rotational mass, increases acceleration, and reduces any possibility of vibration. Additionally, the dampening effect of carbon fiber will reduce shock load and stress on other components such as transmission and front differential. The heavier steel tube will see deflection at high-RPM critical speed, the low mass and high rigidity of carbon fiber reaches a critical speed much higher than any UTV is capable of.  The RCV CV design is unmatched in smoothness and strength over any u-joint prop shaft.  The new RCV prop shaft features 300M CV components that ensure maximum strength.  Prop shaft and components are completely sealed and rebuildable.

    Available for 2-seat and 4-seat Polaris RZR models. For 2-seat models, prop shafts are a 1-piece design, and a safety loop has been incorporated that bolts to the factory carrier bearing mount to contain the prop shaft.  4-seat models are 2-piece and include a replacement carrier bearing. Custom lengths available.

    Pricing starts at $1499.00

    2-Seat part numbers:
    2014-2017 XP1000: RZR-PS-CF
    2016-2017 XP Turbo: RZR-PST-CF

    4-Seat part numbers:
    2014-2017 XP1000 4: RZR-PS4-CF
    2016-2017 XP Turbo 4: RZR-PST4-CF

    For information on this product, please call us at 815-877-7473, email us at sales@rcvperformance.com, or visit us online at www.rcvperformance.com

    Read more »
  3. NEW 300M PRO SERIES II AXLES FOR CAN-AM X3

    RCV Performance Products introducing the new “Pro Series II” axle for the Can-Am X3 X DS and X RS.  The axles feature a plunging inboard and outboard CV much like the factory design, however every opportunity to improve was taken to maximize strength and longevity.  The front inboard CVs are an all 300M construction in addition to all the CV internals featuring 300M components.  The front axle is our 300M Pro Series 33 spline shaft, which is second only to our rear 40 spline 300M shaft – by far the largest axle diameter in the industry.  The rear outboard CV has been increased in size comparable to a full size truck CV to take advantage of additional room at the hub.

    These axles are designed for harsh racing conditions where heat build-up is a concern.  The specially engineered RCV Spec Grease is featured in both the inboard and outboard CVs to battle these extreme conditions.

    Sean Carlini, Engineer at RCV Performance, says, “We have been testing this new axle design for months in several different environments from sand dunes and open desert to tough rocky conditions and we are pleased with the results.  Early versions of these axles are being run in race vehicles, and have already won the UTV World Championships. Our in-house tests have shown the axle to be the strongest aftermarket solution available.”

    For information on this class, please call us at 815-877-7473, email us at sales@rcvperformance.com, or visit us online at www.rcvperformance.com.

    Read more »
  4. INTRODUCING RCV “SUPER 60” 35, 40, & 47 SPLINE AXLE SET

    RCV is introducing the ultimate solution for strength – our Super 60 CV axle set.  Designed to work with the big Ford Superduty applications, but also available in several different configurations available for custom applications.  The CV is our “big bell” housing with 35, 40, and 47 spline options available.  The outboard stub is designed to replace the lock-out and engage directly into the 1.75” 32 spline unit bearing hub providing maximum strength.

    The new Super 60 is a great option for custom axle builders looking for options up to 47 spline axles.  RCV CV Axles are low maintenance and operate with a smoothness you can feel – whether off road or on the street.  As always, our Super 60 axles are backed with a “No Questions Asked” limited lifetime warranty.

    For information on this product, please call us at 815-877-7473, email us at sales@rcvperformance.com, or visit us online at www.rcvperformance.com.

    Read more »
  5. 300M BALL JOINTS FOR POLARIS & CANAM

    RCV has expanded into the side-by-side industry with 300M axle shafts many popular UTVs.  The latest product for the Polaris RZR and Can-Am X3 is the updated 300M ball joint.  Rated at 275% stronger than stock, it is the toughest ball joint on the market. The new design offers adjustability for wear compensation to and maintain a tight fit. It also features a grease fitting to prolong the life of the ball joint.

    Sean Carlini, Engineer at RCV Performance, says, “One of the most commonly broken part in our research are the factory ball joints, our new 300M design offers the user confidence to operate the machine to its fullest capabilities.  Whether on the trail or in race conditions, we believe this to be the strongest solution available.”

    For information on this class, please call us at 815-877-7473, email us at sales@rcvperformance.com, or visit us online at www.rcvperformance.com

    Read more »
  6. INTRODUCING RCV 1-PIECE CV PROP SHAFT FOR POLARIS RZR

    RCV Performance Products is introducing the all-new 1-piece prop shaft to our UTV line featuring new specially designed CVs at both ends. This design eliminates all vibration and carrier bearing noise with the Polaris XP1000 and XP Turbo! The RCV design eliminates any concern of carrier bearing failure or u-joint phasing.  The new RCV prop shaft features 300M CV components that ensure strength.  Prop shaft and components are completely sealed and rebuildable.  A safety loop has been designed that bolts to the factory carrier bearing mount to contain the prop shaft.   Custom lengths available.

    Pricing starts at $999.00

    Part numbers:
    2014-2017 XP1000: RZR-PS
    2016-2017 XP Turbo: RZR-PST

    For information on this product, please call us at 815-877-7473, email us at sales@rcvperformance.com, or visit us online at www.rcvperformance.com.

    Read more »
  7. NEW PRO SERIES II AXLES FOR POLARIS RZR XP1000 & XP TURBO

    RCV Performance Products specializes in industry leading quality parts for countless motorsports applications from Ultra4 race cars, Pro4 trucks, to trail Jeeps and Toyotas, and now UTVs.  All products from RCV are 100% Made in the USA, and are strength tested in-house.

    Read more »
Page
Copyright © 2022 RCV Performance Products. All rights reserved.